A square ZeniRace F722/F405 Flight Controller with a black PCB, featuring four red circular terminal rings on the corners, a central black processor chip, a USB-C port, and white solder pads, shown on a white background.
A small ZeniRace F722/F405 Flight Controller with a black PCB, featuring four red rubber feet and a USB-C port, photographed on a clean white background.
A square ZeniRace F722/F405 Flight Controller with a dark blue PCB, featuring four red circular connectors at the corners, four white USB-C ports along the top edge, and various electronic components and chips printed on the surface.
A small ZeniRace F722/F405 Flight Controller with a dark gray/black PCB, beige connector headers, and four red cylindrical components on the corners, photographed on a clean white background.
An ZeniRace F722/F405 Flight Controller with a black PCB, featuring red terminal caps, a central microchip, and a USB-C port, photographed from a top-down angle on a white background.
An accessories list graphic showing three included parts: an 8-pin ribbon cable with rainbow wires, four black hexagonal nuts, and four pink shock absorber balls, labeled underneath on a white background.
A square ZeniRace F722/F405 Flight Controller with a black PCB, featuring four red circular terminal rings on the corners, a central black processor chip, a USB-C port, and white solder pads, shown on a white background.
A small ZeniRace F722/F405 Flight Controller with a black PCB, featuring four red rubber feet and a USB-C port, photographed on a clean white background.
A square ZeniRace F722/F405 Flight Controller with a dark blue PCB, featuring four red circular connectors at the corners, four white USB-C ports along the top edge, and various electronic components and chips printed on the surface.
A small ZeniRace F722/F405 Flight Controller with a dark gray/black PCB, beige connector headers, and four red cylindrical components on the corners, photographed on a clean white background.
An ZeniRace F722/F405 Flight Controller with a black PCB, featuring red terminal caps, a central microchip, and a USB-C port, photographed from a top-down angle on a white background.
An accessories list graphic showing three included parts: an 8-pin ribbon cable with rainbow wires, four black hexagonal nuts, and four pink shock absorber balls, labeled underneath on a white background.

ZeniRace F722/F405 Flight Controller

SKU: ZR405-032FC

$71.99
/
  • High-Speed Flight Processing：Powered by the STM32 F722 (216MHz) or STM32 F405 (168MHz) processor, delivering fast loop times and responsive flight control for demanding FPV applications.
  • Built for Modern Digital FPV：Native support for DJI O3 / O4 Air Unit, making digital FPV installation cleaner and faster.
  • More UARTs. More Possibilities.：Featuring 5 UART ports, allowing multiple peripherals to run simultaneously；Supports:GPS、ELRS、Crossfire、VTX、Telemetry、External sensors
  • Precision Flight Performance：Equipped with the ICM42688 gyroscope, delivering fast and accurate motion sensing.
  • Dual BEC Power System：Independent 5V / 2.5A and 12V / 2.5A outputs provide stable power for cameras, VTXs, receivers, GPS modules and accessories.
  • Wide Voltage Compatibility：Supports 2S–8S LiPo input；Compatible with multiple drone platforms；Ideal for freestyle, racing and long-range builds；Ready for future upgrades.
  • Engineered for Reliable Flights：Integrated TVS surge protection, onboard current sensor support, and Betaflight compatibility ensure dependable performance in demanding conditions.
Model

Complete Your Build

ZeniRace 60A/65A/70A 4-in-1 ESC
ZeniRace 60A/65A/70A 4-in-1 ESC
$54.99
ZeniRace 80A/100A 4-in-1 ESC
ZeniRace 80A/100A 4-in-1 ESC
$85.99

Secure Checkout

Pay securely with
PayPal

Trusted Delivery

🚚 Free Worldwide Shipping
📦 Tracking Available
🌎 Ships to US & EU

Product Guarantee

✓ 30-Day Money Back Guarantee
✓ 12-Month Warranty
✓ Technical Support
SHOP BY BUILD

Compatible Builds

See where this component fits and explore complete recommended configurations.

Based on selected variant: F405
A close-up of a black quadcopter drone with orange accents and a mounted camera, resting on a dark textured surface with dramatic golden-hour lighting.
RECOMMENDED CONFIGURATION

5" Freestyle

6S
Balanced 6S FPV configurations for freestyle and high-performance flying.
✓ See recommended 5-inch configurations using compatible ZeniRace hardware.
Explore Build
A black quadcopter drone with a camera mounted on its gimbal, flying over a scenic mountain landscape with a river below.
RECOMMENDED CONFIGURATION

7" Long Range

6S / 8S
Higher-current configurations designed for long-range and endurance-oriented FPV builds.
✓ See recommended 7-inch configurations and component combinations.
Explore Build
A large professional drone with a mounted camera and gimbal is flying over a mountainous landscape during sunset or sunrise.
RECOMMENDED CONFIGURATION

Cinelifter

HIGH LOAD
High-load configurations for professional camera payload and demanding propulsion systems.
✓ See recommended Cinelifter configurations for compatible high-current hardware.
Explore Build
i Always verify motor KV, prop size, battery voltage, current draw and payload requirements before finalizing your build.
ZeniRace F722/F405 Flight Controller
ZeniRace F722/F405 Flight Controller
$71.99
$71.99
A wiring diagram for an electronic flight control board, showing connections for camera, GPS, SBUS, CRS1, motor power, and XT60 ports on a white background.

Engineered for Every Flight

ZeniRace F722/F405 Flight Controller for FPV racing drones

The Brain of Your Drone

Powering faster processing, cleaner wiring and uncompromising flight performance

A black quadcopter drone shown from a low angle on a racetrack at sunset, with marketing text on the left reading 'Confidence at Full Throttle' and feature icons for power regulation, TVS protection, and reliable signal processing.

Confidence at Full Throttle

Advanced power regulation, TVS protection and reliable signal processing keep your aircraft responsive when every millisecond matters.

A STM32 F722 microcontroller flight control board with a black PCB, gold-plated pads, a central processor chip, a USB-C port, and four red terminal screws, shown on a black background.

Engineered to Keep Flying

High-quality components and optimized PCB layout help deliver dependable performance flight after flight.

A high-tech quadcopter drone shown in a dark studio setting with its internal electronics and motors exposed. White marketing text on the left reads 'Built Around Precision' with additional feature icons and text below.

Built Around Precision

Every sensor, every processor, every signal path is optimized for faster calculations, lower latency and consistently stable flight.

Promotional graphic for a quadcopter drone controller showing the same drone in four different action scenes: racing on a track, freestyle flying, cinematic flight, and long-range exploration. The text at the top reads 'One Controller.

Built for Every Flight Style

From racing gates to mountain ridges, one FC adapts to every way you fly.

ZeniRace F722/F405 Flight Controller FAQ

Both flight controllers provide reliable Betaflight performance and support modern FPV builds.

F722 offers a faster 216 MHz processor, more processing headroom, and is ideal for advanced freestyle, long-range, and digital FPV builds with multiple peripherals.

F405 runs at 168 MHz and is an excellent choice for most freestyle, racing, and everyday FPV drones while maintaining excellent performance.

Yes.

The ZeniRace F722/F405 FC features a dedicated interface for DJI O3 and O4 Air Units, making installation cleaner and reducing wiring complexity.

The board comes ready for Betaflight, the most widely used firmware for FPV drones.

Betaflight provides powerful tuning tools, extensive community support, and compatibility with a wide range of FPV hardware. (UAV Drone Academy)

The flight controller supports 2S to 8S LiPo batteries (DC 7–36V).

This wide voltage range makes it suitable for:

3–5" freestyle drones

Racing quads

Long-range FPV

Cinematic builds

Heavy-lift and X8 platforms

The FC supports most popular receiver protocols, including:

ELRS (CRSF)

Crossfire (CRSF)

SBUS

IBUS

DSM

This allows compatibility with the majority of modern radio systems.

Yes.

The board supports external GPS modules through its UART ports, allowing features such as GPS Rescue, Return-to-Home (firmware dependent), speed, altitude, and location display.

The flight controller provides 5 UART ports, making it easy to connect multiple devices simultaneously, such as:

GPS

Receiver (ELRS / Crossfire)

Digital or Analog VTX

Telemetry

Additional peripherals

The onboard 5V/2.5A and 12V/2.5A BECs provide stable power for connected devices.

Typical applications include:

DJI Air Unit

Analog VTX

FPV Camera

GPS Module

Receiver

LED accessories

Separate regulated outputs help reduce electrical noise and simplify wiring.

Yes.

The board includes 16MB onboard Blackbox memory, allowing pilots to record flight data for tuning, troubleshooting, and performance optimization.

Absolutely.

The ICM42688 gyroscope delivers fast, accurate motion sensing and excellent vibration resistance, making it ideal for aggressive freestyle, racing, cinematic flying, and precision tuning.

Yes.

The ZeniRace F722/F405 FC supports both:

Analog FPV systems

DJI O3 / O4 digital systems

This flexibility allows you to build or upgrade your drone without changing the flight controller.

Yes.

The F405 version is a great option for first-time builders, while the F722 version offers additional processing headroom and expansion for experienced pilots. Both work seamlessly with Betaflight and support a wide range of modern FPV components. (UAV Drone Academy)

For optimal performance, we recommend pairing this flight controller with:

ZeniRace 70A 4-in-1 ESC

ZeniRace 80A 4-in-1 ESC

Other Betaflight-compatible 30.5 × 30.5 mm ESCs

Matching the FC with a compatible ESC ensures reliable communication and simplifies installation.

The 30.5 × 30.5 mm (M3) mounting pattern fits most standard:

5-inch freestyle frames

6-inch long-range frames

7-inch long-range platforms

Racing frames

X8 and custom FPV builds

Package contents include:

1 × ZeniRace F722/F405 Flight Controller

Silicone connection cables

Mounting hardware

User documentation

(Package contents may vary depending on the selected version.)

You may also like