A small ZeniRace 60A/65A/70A 4-in-1 ESC with multiple black integrated circuit chips, gold-plated contacts, and four red terminal caps, photographed on a clean white background.
A compact ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, multiple black integrated circuits, gold-plated contacts, and four red terminal caps, photographed on a clean white background.
A small ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, gold-plated connectors, black integrated circuit chips, and four red terminal screws, photographed on a clean white background.
A compact ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, gold-plated contacts, multiple black integrated circuits, and four red terminal covers, shown on a clean white background.
An accessories list graphic showing included components: a 70A ESC microcontroller, a 680uF 50V capacitor, four pink M3 shock absorber balls, and an XT60 power cord, all labeled on a white background.
A small ZeniRace 60A/65A/70A 4-in-1 ESC with multiple black integrated circuit chips, gold-plated contacts, and four red terminal caps, photographed on a clean white background.
A compact ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, multiple black integrated circuits, gold-plated contacts, and four red terminal caps, photographed on a clean white background.
A small ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, gold-plated connectors, black integrated circuit chips, and four red terminal screws, photographed on a clean white background.
A compact ZeniRace 60A/65A/70A 4-in-1 ESC with a black PCB, gold-plated contacts, multiple black integrated circuits, and four red terminal covers, shown on a clean white background.
An accessories list graphic showing included components: a 70A ESC microcontroller, a 680uF 50V capacitor, four pink M3 shock absorber balls, and an XT60 power cord, all labeled on a white background.

ZeniRace 60A/65A/70A 4-in-1 ESC

SKU: ZR060-032BL

$54.99
/
  • Massive 70A Continuous Power：Built to handle demanding freestyle, racing, and cinematic FPV setups with 70A continuous current and 80A burst capability, delivering consistent power even under extreme loads.
  • Supports 2S–8S LiPo Systems：Compatible with a wide voltage range from 2S to 8S, giving builders the flexibility to create lightweight racing drones or high-voltage cinematic platforms.
  • Dual Firmware Support：Supports both BLHeli_32 and AM32, allowing pilots to choose the firmware ecosystem that best fits their flying style and tuning preferences.
  • Fast, Precise Motor Control：Supports DShot150 / 300 / 600, Bidirectional DShot, and PWM, ensuring ultra-fast communication between the flight controller and ESC.
  • Premium MOSFET Power Stage：Powered by high-quality 5C410 MOSFETs, engineered for efficient power transfer and reduced heat generation during sustained high-current operation.
  • Integrated TVS Surge Protection：Built-in TVS protection helps absorb voltage spikes generated during hard braking or battery disconnection.
  • Real-Time Current Monitoring：Integrated current sensor provides accurate telemetry feedback to your flight controller.
Continuous Current
Firmware

Complete Your Build

ZeniRace F722/F405 Flight Controller
ZeniRace F722/F405 Flight Controller
$71.99
ZeniRace H743 Flight Controller
ZeniRace H743 Flight Controller
$99.99

Secure Checkout

Pay securely with
PayPal

Trusted Delivery

🚚 Free Worldwide Shipping
📦 Tracking Available
🌎 Ships to US & EU

Product Guarantee

✓ 30-Day Money Back Guarantee
✓ 12-Month Warranty
✓ Technical Support
SHOP BY BUILD

Compatible Builds

See where this component fits and explore complete recommended configurations.

Based on selected variant: 60A / BLHeil-32
A close-up of a black quadcopter drone with orange accents and a mounted camera, resting on a dark textured surface with dramatic golden-hour lighting.
RECOMMENDED CONFIGURATION

5" Freestyle

6S
Balanced 6S FPV configurations for freestyle and high-performance flying.
✓ See recommended 5-inch configurations using compatible ZeniRace hardware.
Explore Build
A black quadcopter drone with a camera mounted on its gimbal, flying over a scenic mountain landscape with a river below.
RECOMMENDED CONFIGURATION

7" Long Range

6S / 8S
Higher-current configurations designed for long-range and endurance-oriented FPV builds.
✓ See recommended 7-inch configurations and component combinations.
Explore Build
A large professional drone with a mounted camera and gimbal is flying over a mountainous landscape during sunset or sunrise.
RECOMMENDED CONFIGURATION

Cinelifter

HIGH LOAD
High-load configurations for professional camera payload and demanding propulsion systems.
✓ See recommended Cinelifter configurations for compatible high-current hardware.
Explore Build
i Always verify motor KV, prop size, battery voltage, current draw and payload requirements before finalizing your build.
ZeniRace 60A/65A/70A 4-in-1 ESC
ZeniRace 60A/65A/70A 4-in-1 ESC
$54.99
$54.99
Technical dimension drawing of a rectangular electronic circuit board shown from multiple angles on a white background, with measurements labeled 42mm, 30.5mm, 43mm, and 6.

DESIGNED TO PERFORM

A high-performance FPV flight controller board with gold and black components, red mounting rings, and a black PCB, displayed on a dark gray pedestal against a black background.

Power. Delivered Precisely.

Stable current delivery for confident flights under every throttle input.

A small electronic circuit board or drone motor assembly with red terminal caps and gold contacts, shown floating above a black pedestal against a dark background with stylized blue and brown airflow effects.

Ready for Maximum Load.

Consistent power delivery when every amp matters.

An exploded view of a high-performance electronic circuit board assembly, showcasing multiple stacked layers with gold-plated traces, black PCBs, integrated heat spreaders, capacitors, and red terminal rings, secured with black screws on a dark background.

Every Layer Matters.

Engineered from the inside out for efficiency and reliability.

A close-up of a black electronic flight controller or drone processor mounted on a carbon fiber drone frame, with gold and silver metallic components and screws visible against a dark background.

Designed for Every Build.

Fits seamlessly into modern freestyle, racing and long-range platforms.

A close-up of a ZenRACE drone motor and electronic components laid out on a wooden workbench with tools and screws around them.

Built by Pilots.

Describe the key product advantage here.

ZeniRace 60A/65A/70A 4-in-1 ESC FAQ

This 4-in-1 ESC supports 2S to 8S LiPo batteries (DC 7–36V), making it suitable for a wide range of FPV builds—from lightweight freestyle drones to high-power long-range and cinematic platforms.

The ESC is compatible with both BLHeli_32 and AM32 firmware.

Depending on the version you choose, you can benefit from advanced features such as configurable startup tones, motor timing adjustments, RPM filtering, and bidirectional DShot support.

Yes.

The ESC fully supports Bidirectional DShot, allowing Betaflight to use RPM Filtering for smoother flight performance, reduced motor noise, and improved PID tuning.

Continuous Current: 70A

Burst Current: 80A

This provides ample power for demanding freestyle, racing, and cinematic flying while maintaining stable performance under heavy loads.

Absolutely.

The 70A output is ideal for 5-inch and larger FPV drones, especially high-performance 6S and 8S builds using powerful brushless motors.

No.

This ESC does not include an onboard BEC and is designed to work with a compatible flight controller that provides regulated power outputs for your receiver, VTX, camera, and other peripherals.

Yes.

The integrated current sensor provides accurate current telemetry to your flight controller, allowing real-time battery consumption monitoring, OSD display, and more precise battery management.

The ESC includes TVS surge protection, helping absorb voltage spikes generated during aggressive throttle changes or sudden motor braking.

This improves overall reliability and helps protect sensitive electronic components.

The ESC supports:DShot150、DShot300、DShot600、PWM

Digital DShot protocols are recommended for the best throttle precision and reliability.

Yes.

The ESC works seamlessly with Betaflight-compatible flight controllers that support standard ESC signal connections and DShot protocols.

The ESC features a 30.5 × 30.5 mm (M4) mounting pattern, making it compatible with most standard full-size FPV racing and freestyle frames.

Yes.

Its high current capacity, low-latency response, and broad voltage support make it suitable for:FPV Freestyle、FPV Racing、Cinematic FPV、Long-Range FPV、Heavy-Lift FPV Builds

This ESC pairs well with most high-performance brushless motors running on 4S to 8S LiPo batteries, including common sizes such as:

2207

2306

2306.5

2407

2507

Larger motors for cinematic and long-range builds

Always ensure your motor and propeller combination stays within the ESC's current rating.

Yes.

The ESC is designed for custom FPV builds and requires soldering of:

Battery leads

Motor wires

Flight controller signal wires

Professional soldering is recommended to ensure optimal performance and reliability.

The 70A ESC is ideal for pilots who demand maximum power, precise throttle control, and dependable reliability.

Whether you're building a competitive freestyle quad, a high-speed racing drone, or a heavy-duty cinematic platform, it delivers the performance needed for modern high-power FPV systems.

You may also like